Manual Branding Iron - 35mm Diameter

Personalised Manual Branding Iron – 35mm Diameter

Add a distinctive, professional finishing touch to your products with PackGenie's personalised manual branding iron. Featuring a 35mm diameter stainless steel branding head, this custom-made fire stamp allows you to mark suitable materials with your own logo, initials or artwork.

Also known as a fire stamp, hand branding iron or burger branding stamp, this versatile tool can be used on suitable surfaces including wood, leather, cardboard, cork and other heat-compatible materials.

Our custom branding irons feature a stainless steel branding end connected to a steel rod with a wooden handle. Each iron is supplied with a table stand for convenient use.

Designed for short production runs and occasional use, this manual branding iron offers a practical way to personalise products, packaging and suitable food items without needing automated branding equipment.

Heat the stainless steel branding head using a suitable butane or propane gas flame, then carefully apply it to your chosen surface. The heat creates a distinctive brown, fire-coloured branded impression.

Always test your branding iron on a spare sample before working on your finished products. The required temperature and contact time will depend on the material being branded.

With free artwork preparation, a digital proof before production and a standard lead time of 2–3 weeks from artwork approval, creating your own personalised branding iron is straightforward.

Key Features

• 35mm diameter personalised branding head
• Custom-made with your logo, initials or artwork
• Stainless steel branding end
• Steel rod construction
• Wooden handle
• Manual, flame-heated operation
• Butane or propane gas flame recommended for heating
• Creates a heat-branded impression without ink
• Suitable for short runs and occasional branding
• Suitable for compatible wood, leather, cardboard and cork
• Potential food branding applications, subject to food-contact suitability
• Supplied with a table stand
• Made in Britain
• Free artwork preparation and digital proof
• Standard lead time of 2–3 weeks from artwork approval

Custom Branding Iron for Wood, Leather and Packaging

Our 35mm personalised branding iron is ideal for adding your logo or custom design to a range of compatible products and materials.

Unlike an ink stamp, a manual fire stamp uses heat to leave a distinctive impression on the surface, giving suitable products a handcrafted and recognisable finish.

Potential applications include:

• Wooden products: Personalise suitable wooden crafts, decorative items and handmade goods.
• Leather accessories: Add your logo or initials to compatible leather products.
• Cardboard packaging: Create a branded impression on suitable uncoated cardboard surfaces.
• Cork products: Add custom branding to compatible cork materials.
• Handmade goods: Give your products a distinctive personalised finish.
• Food presentation: Brand suitable burger buns, bread or meat only when the branding head is confirmed as appropriate for direct food contact.

The original product information also mentions veneer, chipboard and certain plastics. These materials require additional care: heat can damage coatings, adhesives or plastics, and some surfaces may release harmful fumes. Confirm heat compatibility before use.

Personalised Burger Branding Iron

A custom burger branding iron can help create distinctive food presentation for suitable burger buns, bread and meat.

The original product information specifies a stainless steel branding end for direct food-contact applications.

Before using your branding iron with food, confirm that the complete food-contact specification is suitable for your intended use. Follow appropriate food hygiene procedures and clean the equipment between uses.

Food safety note: Stainless steel construction alone does not establish food-contact compliance. Confirm the material grade, surface finish and suitability with PackGenie before use on food products.

How to Use a Manual Branding Iron

Our handheld fire stamp is designed for manual heat branding. The temperature and contact time required will vary according to the surface.

1. Prepare your material: Check that the surface is suitable for heat branding and position it securely.
2. Heat the branding head: Use a suitable butane or propane gas flame in a controlled, well-ventilated area.
3. Make a test impression: Test on spare material to determine the appropriate heat and contact time.
4. Apply the branding iron: Carefully position the heated head against the surface using the tested method.
5. Check the result: Allow the branded surface to cool before handling or packaging.
6. Cool the iron safely: Place it on a suitable heat-resistant support away from combustible materials until completely cool.

Safety: Metal components can become extremely hot. Use suitable heat-resistant protective equipment, keep the iron away from flammable materials and never leave it unattended while hot.

35mm Stainless Steel Branding Head

Each custom manual branding iron features a 35mm diameter stainless steel head attached to a steel rod with a wooden handle.

The 35mm circular branding area provides space for appropriately sized logos, initials and simple graphic designs.

Very fine lines, small lettering or intricate artwork may need adjustment to create a clear heat-branded impression. Our artwork team can help prepare your design for the branding head.

Product Specifications

Free Artwork Preparation

Personalise your 35mm branding iron with your business logo, initials or custom artwork.

Upload your artwork when placing your order, or email it to our team after purchase. If you need help preparing your design, our in-house artwork team can assist at no additional artwork setup cost.

We'll email a digital proof for you to review before production begins. You can request changes before approving the final design.

For the best result within the 35mm diameter branding area, we recommend a clear design with appropriately sized lettering and uncomplicated detail.

Production and Delivery

Our standard lead time for this custom stainless steel branding iron is approximately 2–3 weeks from artwork approval.

The original product information states that delivery is to one UK mainland destination.

Your order will move into production once you have approved the final artwork proof.

Create a Distinctive Branded Finish

Whether you're personalising wooden products, leather accessories, cardboard packaging or suitable food items, our 35mm manual branding iron offers a practical way to add your brand identity to compatible surfaces.

Upload your logo or artwork and let PackGenie's team help prepare your personalised branding stamp.